A very quick update this week - as I'm super busy at work.
With the help of the 'grabber' I was able to secure the pitot tube line to the back of the wing spar. I used the same 'U' shaped fiberglass brackets I've used previously for the rudder cable tubes.
I've also fitted the throttle cable and bonded in the throttle/brake assembly (using copious amounts of flock) I'll be adding two bolts and nuts to this later as an extra securing method.
More detail on all of this next time I post.
 |
| Pitot hole fixed up with flock |
 |
| Pitot line being fixed to rear of main spar |
 |
| Throttle/brake assembly bonded onto bottom of safety cell. |
No comments:
Post a Comment